Astro Battery Camera User Manual

1080p Wire-Free Battery Camera


image 23
  1. Microphone
  2. Wide-angle Lens
  3. Indicator Lights
  4. Motion Sensor
  5. Light Sensor
  6. Speaker
image 24
Red Indicator Light
Flashing red
Wi-Fi connection
image 25
Blue Indicator Light
Blue light
Live view
Flashing blue
Motion detection

In the box

image 26

Astro Battery Camera

image 27

Rechargeable 6000mAh Battery Pack

image 28

Solar Panel +Mounting arm

image 29


image 30

Anchor Packs

image 31

Screw Packs

image 32

User Manual

Charge the battery

Charge the included battery.

Fully charge the battery by plugging it into a USB port using a Micro USB cable.
It takes about 6-8 hours for the battery to fully charge.When only one blue LED is lit, that indicates the battery is fully charged.

image 33

Set up your Astro

Remove the battery cover.

Twist the battery cover counterclockwise to unlock, and then remove it from your Astro.

image 34

Insert the battery.

Insert the fully charged battery into the bottom of your Astro until it clicks into place.

image 35

Set up your device in the Aiwit app.

Before You Start

  1. Download and install Aiwit App.
    Scan the QR code below or search for Aiwit on the Apple App Store or Google Play. Download and install the app.
  2. Create an Aiwit account.
image 36

Set up your Astro in the Aiwit app.
To pair your Astro, follow the steps below and in-app instructions.

  1. Open Aiwit App and log in to your account.
  2. To add your camera, select the + icon.
  3. Select Battery Camera 2.
  4. Press and hold the Setup Button until the red light is flashing.
  5. Enter your 2.4GHz Wi-Fi network and the Wi-Fi password, then tap Next (5GHz is not supported).
  6. Use your Astor camera to scan the QR Code shown on the app, then select Confirm once the Wi-Fi setup has finished.
image 37

Attach the battery cover.

Find the Open lock symbol located behind your Astor. Align the symbol with the line on the battery cover. Push the cover on and turn clockwise until it locks.

image 38

Give it a try!

After setup, tap the Live View in the Aiwit app to see live video from your Astro.

Install the Astor on a wall:

Attach the stand to the camera.

image 39

Secure tightly with the stand screw.

image 40

Mark drill holes and use a bit to drill holes in your wall or ceiling. Insert anchors and secure your Astor with mounting screws.

image 41

Screw the device with bracket to the base

image 42

Need help setting up?

If you experience some issues during the app setup, try these steps:

Check your WiFi password.
The most common issue during setup is incorrect Wi-Fi passwords. Passwords are case sensitive. Please double-check your password.

Reboot the router/modem.
If you have entered the correct password, but still experiencing issues, try unplugging the power to your router/modem. Wait for 30 seconds, then plug the power back and turn it back on.Proceed to setup again in the Aiwit app.

Frequently asked questions

How long do my videos stay in my account?
Your videos are stored in the Free Cloud for up to 7 days.

How to RESET network settings
Press and hold the Setup Button until red light is flashing.Follow the in-app instructions to finish your Wi-Fi setup.

How to share the device with my family
Open the Aiwit app. From the home page, tap the Share icon. Tap Share via Email or Share via QR Code. You can share the device with up to 8 users.

Share via Email:
The new user has to download the Aiwit app and create an account with the same email address which the device owner has shared with. Log in to the account and you’ll see the shared device.

Share via QR Code:

  1. Open the Aiwit App on a new user’s smartphone.
  2. From the home page, tap +.
  3. Tap QR Code Sharing, then scan the QR code the device owner generated before.
  4. You will see Share successful, then tap Confirm.

How many users can view the video at the same time?
Up to 3 users may view the video feed, but only 1 user can use the direct intercom. Both iOS and Android are compatible.

Is 5GHz Wi-Fi supported?
No. Only 2.4GHz Wi-Fi is supported.

Why is my Wi-Fi signal poor on my device?
Your device may be too far away from your wireless router or you may have some obstructions in between that reduce signal strength. You might try repositioning your router or getting a signal extender/repeater for your wireless router.

How to adjust Motion Detection Sensitivity
From the home page, tap Motion Detection icon.

Motion Detection Sensitivity

  • Fast: Records and notifies you about every motion.
    Shortest battery life.
  • Medium: Records and notifies you about motion less
    often. Standard battery life.
  • Slow: Records and notifies you about motion even less
    often. Maximum battery life.

How to enable Notifications on my phone
To do this, you need to give permission for the Aiwit app to access to your microphone and enable notifications. Follow these steps to enable notifications.

  1. Open Settings. Go to Aiwit app permissions and select Notifications.
  2. Make sure all switches are on.

Install your Solar Panel

Please complete the battery camera setup in the App prior to installing the solar panel.

Choose the installation location

Pick an unshaded spot for best sun exposure. The solar panel should be installed where it will receive several hours of direct sun daily.

Mark your spot

Place the solar panel mounting arm mark where you plan to install, and mark the screw hole positions lightly with a pencil.

image 43

Drill the holes

Optional: You may opt to use a drill bit to drill the holes where you have previously marked.

  • For mounting surfaces that are brick, concrete, or stucco,please use the plastic anchors. You may need to use a hammer to install the anchors.
  • For mounting surfaces that are wood or vinyl, you can omit the anchors, and use the screws directly.

Install the mounting arm

Use a screwdriver to secure the mounting arm to the wall, tighten securely.

image 44

Attach the solar panel

Attach the solar panel onto the mounting arm, ensure that it is installed correctly.

Note: You may adjust the angle of the solar panel for better sun coverage. Simply loosen the adjustment screw on the mounting arm, adjust to desired angle, and re-tighten the screw.
image 45

Plug the cable

Lastly, plug the solar panel charging cable into the Astor. Let’s start charging!

Scroll to Top